.:TECNODIN:. LEVELLING FEET

PRODUCTS OPERATING ELEMENTS LEVELLING FEET

110088FIXED FEET WITH THREADED STUD

Optional: Non-skid rubber pad.
Supplied not mounted:
Ø 32mm Code 11008800903
Ø 40mm Code 11008800904
If you want the feet with the rubber mounted, please ask.

Code	D	H	h	d	A	Kg*
11008832520	32	38	13	M5	25	500
11008832512	32	43	13	M6	30	700
11008832533	32	39	13	M8	26	800
11008832534	32	36	13	M10	23	800
11008840520	40	38	13	M5	25	500
11008840540	40	43	13	M6	30	700
11008840533	40	49	13	M8	36	800
11008840534	40	46	13	M10	33	800

Base material: PA black reinforced polyamide.
Treated steel stud.
Mounting with cross screwdriver on the base
Locknut available.
*Max. static load.
Data Sheet (PDF)

UNC THREADED VERSION - (Inch measure)
Code	D	H	h	d	A	Lbs*	CAD
11008832537	1.26	1.49	0.51	10-24	0.98	1102
11008832538	1.26	1.69	0.51	1/4-20	1.18	1543
11008832535	1.26	2.01	0.51	5/16-18	1.50	1763
11008832536	1.26	2.26	0.51	3/8-16	1.75	1763
11008840544	1.57	1.49	0.51	10-24	0.98	1102
11008840545	1.57	1.69	0.51	1/4-20	1.18	1543
11008840535	1.57	2.01	0.51	5/16-18	1.50	1763
11008840536	1.57	2.26	0.51	3/8-16	1.75	1763

Base material: PA black reinforced polyamide.
Treated steel stud.
Mounting with cross screwdriver on the base
Locknut available.
*Max. static load.

110088 INOXFIXED FEET WITH THREADED STAINLESS STEEL STUD

Optional: Non-skid rubber pad.
Supplied not mounted:
Ø 32mm Code 11008800903
Ø 40mm Code 11008800904
If you want the feet with the rubber mounted, please ask.
Code D H h d A Kg* CAD

11008832553 32 43 13 M6 30 700

11008832550 32 39 13 M8 26 800

11008832551 32 36 13 M10 23 800

11008840552 40 43 13 M6 30 700

11008840550 40 49 13 M8 36 800

11008840551 40 46 13 M10 33 800

Base material: PA black reinforced polyamide.
Stainless steel stud AISI 304.
Mounting with cross screwdriver on the base
Locknut available.
*Max. static load.
Data Sheet (PDF)

UNC THREADED VERSION - (Inch measure)

Code D H h d A Lbs* CAD

11008832565 1.26 1.85 0.51 5/16-18 1.34 1763

11008840564 1.57 1.93 0.51 3/8-16 1.42 1763

Base material: PA black reinforced polyamide.
Stainless steel stud AISI 304.
Mounting with cross screwdriver on the base
Locknut available.
*Max. static load.

Code	D	H	h	d	A	Kg*
11008832553	32	43	13	M6	30	700
11008832550	32	39	13	M8	26	800
11008832551	32	36	13	M10	23	800
11008840552	40	43	13	M6	30	700
11008840550	40	49	13	M8	36	800
11008840551	40	46	13	M10	33	800

110088 RBFIXED RUBBER FEET

Code	D	H	h	d	A	Kg*
11008832570	32	42	16	M8	24	300
11008832571	32	36	16	M10	20	400
11008840570	40	52	16	M8	34	300
11008840571	40	46	16	M10	30	400

Base material: TPE rubber shore A.
Treated threaded steel stud.
Locknut available.
*Max. static load.
Data Sheet (PDF)

UNC THREADED VERSION - (Inch measure)
Code	D	H	h	d	A	Lbs*	CAD
11008832572	1.26	2.01	0.63	5/16-18	1.38	650
11008832573	1.26	2.27	0.63	3/8-16	1.64	850
11008840572	1.57	2.01	0.63	5/16-18	1.38	650
11008840573	1.57	2.27	0.63	3/8-16	1.64	850

Base material: TPE rubber shore A.
Treated threaded steel stud.
Locknut available.
*Max. static load.

110088 RB INOXFIXED RUBBER FEET WITH STAINLESS STEEL STUD

Code	D	H	h	d	A	Kg*
11008832580	32	42	16	M8	24	300
11008832581	32	36	16	M10	20	400
11008840580	40	52	16	M8	34	300
11008840581	40	46	16	M10	30	400

Base material: TPE rubber shore A.
Stainless steel stud AISI 304.
Locknut available.
*Max. static load.
Data Sheet (PDF)

UNC THREADED VERSION - (Inch measure)
Code	D	H	h	d	A	Lbs*	CAD
11008832582	1.26	1.85	0.63	5/16-18	1.22	650
11008832583	1.26	1.93	0.63	3/8-16	1.30	850
11008840582	1.57	1.85	0.63	5/16-18	1.22	650
11008840583	1.57	1.93	0.63	3/8-16	1.30	850

Base material: TPE rubber shore A.
Stainless steel stud AISI 304.
Locknut available.
*Max. static load.

110089ADJUSTABLE FEET WITH THREADED STUD

Optional: Non-skid rubber pad.
Supplied not mounted:
Ø 32mm Code 11008800903
Ø 40mm Code 11008800904
Ø 50mm Code 11008900905 (NBR70 Shore A)
Ø 80mm Code 11008900907 (NBR70 Shore A)
If you want the feet with the rubber mounted, please ask.

-
Code	D	H	h	d	A	h2	Kg*	CAD
11008903851	32	67	13	M8	45	2	1000
11008903852	32	92	13	M8	70	2	1000
11008903853	32	67	13	M10	45	2	1000
11008903854	32	92	13	M10	70	2	1000
11008904851	40	67	13	M8	45	3	1000
11008904852	40	92	13	M8	70	3	1000
11008904853	40	67	13	M10	45	3	1000
11008904854	40	92	13	M10	70	3	1000
11008905856	50	72	18	M8	45	2	1000
11008905857	50	97	18	M8	70	2	1000
11008905851	50	72	18	M10	45	2	1000
11008905852	50	97	18	M10	70	2	1000
11008905853	50	72	18	M12	45	2	1000
11008905854	50	97	18	M12	70	2	1000
11008908861	80	73	19	M8	45	2	1000
11008908862	80	98	19	M8	70	2	1000
11008908853	80	73	19	M10	45	2	1000
11008908854	80	98	19	M10	70	2	1000
11008908851	80	73	19	M12	45	2	1000
11008908852	80	98	19	M12	70	2	1000
11008908863	80	98	19	M14	70	2	1000
11008908864	80	148	19	M14	120	2	1000
11008908855	80	98	19	M16	70	2	1000
11008908856	80	148	19	M16	120	2	1000
11008908857	80	128	19	M20	100	2	1000

Base material: PA black reinforced polyamide.
Treated steel stud.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

UNC THREADED VERSION - (Inch measure)
Code	D	H	h	d	A	h2	Lbs*	CAD
11008903855	1.26	2.64	0.51	5/16-18	1.77	0.08	2200
11008903856	1.26	3.62	0.51	5/16-18	2.76	0.08	2200
11008903857	1.26	2.64	0.51	3/8-16	1.77	0.08	2200
11008903858	1.26	3.62	0.51	3/8-16	2.76	0.08	2200
11008904855	1.57	2.64	0.51	5/16-18	1.77	0.12	2200
11008904856	1.57	3.62	0.51	5/16-18	2.76	0.12	2200
11008904857	1.57	2.64	0.51	3/8-16	1.77	0.12	2200
11008904858	1.57	3.62	0.51	3/8-16	2.76	0.12	2200
11008905860	1.97	2.83	0.71	5/16-18	1.77	0.08	2200
11008905861	1.97	3.82	0.71	5/16-18	2.76	0.08	2200
11008905862	1.97	2.83	0.71	3/8-16	1.77	0.08	2200
11008905863	1.97	3.82	0.71	3/8-16	2.76	0.08	2200
11008905864	1.97	2.83	0.71	1/2-13	1.77	0.08	2200
11008905865	1.97	3.82	0.71	1/2-13	2.76	0.08	2200
11008908866	3.15	2.87	0.75	5/16-18	1.77	0.08	2200
11008908867	3.15	3.86	0.75	5/16-18	2.76	0.08	2200
11008908868	3.15	2.87	0.75	3/8-16	1.77	0.08	2200
11008908869	3.15	3.86	0.75	3/8-16	2.76	0.08	2200
11008908870	3.15	2.87	0.75	1/2-13	1.77	0.08	2200
11008908871	3.15	3.86	0.75	1/2-13	2.76	0.08	2200
11008908872	3.15	3.86	0.75	9/16-12	2.76	0.08	2200
11008908873	3.15	5.83	0.75	9/16-12	4.72	0.08	2200
11008908874	3.15	3.86	0.75	5/8-11	2.76	0.08	2200
11008908876	3.15	5.83	0.75	5/8-11	4.72	0.08	2200
11008908877	3.15	5.05	0.75	3/4-10	3.94	0.08	2200

Base material: PA black reinforced polyamide.
Treated steel stud.
Locknut available.
*Max. static load (vertical stud).

Available in orange colour RAL 2004 and blue colour RAL 5005.
Other colours, ask.
Orange feet Blue feet

110090ADJUSTABLE FEET WITH THREADED STUD & THROUGH HOLES

Optional: Non-skid rubber pad.
Supplied not mounted:
Ø 80 mm Code 11009000908
(NBR70 Shore A)
If you want the feet with
the rubber mounted, please ask.

Code	D	H	h	d	A	h2	d2	Kg*
11009008858	80	73	19	M8	45	2	9	1000
11009008859	80	98	19	M8	70	2	9	1000
11009008853	80	73	19	M10	45	2	9	1000
11009008854	80	98	19	M10	70	2	9	1000
11009008851	80	73	19	M12	45	2	9	1000
11009008852	80	98	19	M12	70	2	9	1000
11009008860	80	98	19	M14	70	2	9	1000
11009008861	80	148	19	M14	120	2	9	1000
11009008855	80	98	19	M16	70	2	9	1000
11009008856	80	148	19	M16	120	2	9	1000
11009008857	80	128	19	M20	100	2	9	1000

Base material: PA black reinforced polyamide.
Treated steel stud.
Other colors, ask.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

UNC THREADED VERSION - (Inch measure)
Code	D	H	h	d	A	h2	d2	Lbs*	CAD
11009008862	3.15	2.87	0.75	5/16-18	1.77	0.08	0.35	2200
11009008863	3.15	3.86	0.75	5/16-18	2.76	0.08	0.35	2200
11009008864	3.15	2.87	0.75	3/8-16	1.77	0.08	0.35	2200
11009008865	3.15	3.86	0.75	3/8-16	2.76	0.08	0.35	2200
11009008866	3.15	2.87	0.75	1/2-13	1.77	0.08	0.35	2200
11009008867	3.15	3.86	0.75	1/2-13	2.76	0.08	0.35	2200
11009008868	3.15	3.86	0.75	9/16-12	2.76	0.08	0.35	2200
11009008869	3.15	5.83	0.75	9/16-12	4.72	0.08	0.35	2200
11009008870	3.15	3.86	0.75	5/8-11	2.76	0.08	0.35	2200
11009008871	3.15	5.83	0.75	5/8-11	4.72	0.08	0.35	2200
11009008872	3.15	5.04	0.75	3/4-10	3.94	0.08	0.35	2200

Base material: PA black reinforced polyamide.
Treated steel stud.
Locknut available.
*Max. static load (vertical stud).

420001 INOXADJUSTABLE FEET 40/50 WITH THREADED STAINLESS STEEL STUD

Code	D	h	d	A	H	Wrench	h2	Kg*
42000104550	40	13	M8	45	68	6	2,5	1000
42000104551	40	13	M8	65	88	6	2,5	1000
42000104552	40	13	M10	35	60	8	2,5	1100
42000104553	40	13	M10	70	95	8	2,5	1100
42000105550	50	13	M8	45	68	6	2,5	1100
42000105551	50	13	M8	65	88	6	2,5	1100
42000105552	50	13	M10	35	60	8	2,5	1200
42000105553	50	13	M10	70	95	8	2,5	1200
42000105554	50	13	M12	43	70	10	2,5	1300
42000105555	50	13	M12	63	90	10	2,5	1300

Base material: PA black reinforced polyamide.
Stainless steel stud AISI-304.
Locknut available.
*Max. static load (vertical stud).
Optional: PVC non-slip rubber pad.
Supplied not mounted.
Ø 40 mm Code: 42005001040.
Ø 50 mm Code: 42005001050.
Data Sheet (PDF)

420001ADJUSTABLE FEET 102/124 WITH THREADED STUD

Code	D	D1	h	d	A	H	d2	Wrench	h2	Kg*
42000110530	102	74	20,3	M16	90	130	10,5	13	3	2200
42000110531	102	74	20,3	M16	125	165	10,5	13	3	2200
42000110532	102	74	20,3	M16	165	205	10,5	13	3	2200
42000110533	102	74	20,3	M20	116	160	10,5	17	3	2400
42000110534	102	74	20,3	M20	198	242	10,5	17	3	2400
42000112530	124	94	24,3	M16	90	134	10,5	13	3	2500
42000112531	124	94	24,3	M16	125	169	10,5	13	3	2500
42000112532	124	94	24,3	M16	165	209	10,5	13	3	2500
42000112533	124	94	24,3	M20	116	164	10,5	17	3	2700
42000112534	124	94	24,3	M20	198	246	10,5	17	3	2700

Base material: PA black reinforced polyamide.
Treated steel stud.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Optional: PVC non-slip rubber pad.
Supplied not mounted.
Ø 102 mm Code: 42005001100.
Ø 124 mm Code: 42005001120.
Data Sheet (PDF)

420001 INOXADJUSTABLE FEET 80/102/124 WITH THREADED STAINLESS STEEL STUD

Code	D	D1	h	d	A	H	d2	Wrench	h2	Kg*
42000108550	80	54	17,3	M8	45	74	9	6	3	1200
42000108551	80	54	17,3	M8	65	94	9	6	3	1200
42000108552	80	54	17,3	M10	35	66	9	8	3	1400
42000108553	80	54	17,3	M10	70	101	9	8	3	1400
42000108554	80	54	17,3	M12	43	76	9	10	3	1500
42000108555	80	54	17,3	M12	77	111	9	10	3	1500
42000108556	80	54	17,3	M16	60	97	9	13	3	1900
42000108557	80	54	17,3	M16	125	162	9	13	3	1900
42000108558	80	54	17,3	M20	116	157	9	17	3	2100
42000110550	102	74	20,3	M16	90	130	10,5	13	3	2200
42000110551	102	74	20,3	M16	125	165	10,5	13	3	2200
42000110552	102	74	20,3	M16	165	205	10,5	13	3	2200
42000110553	102	74	20,3	M20	116	160	10,5	17	3	2400
42000110554	102	74	20,3	M20	198	242	10,5	17	3	2400
42000112550	124	94	24,3	M16	90	134	10,5	13	3	2500
42000112551	124	94	24,3	M16	125	169	10,5	13	3	2500
42000112552	124	94	24,3	M16	165	209	10,5	13	3	2500
42000112553	124	94	24,3	M20	116	164	10,5	17	3	2700
42000112554	124	94	24,3	M20	198	246	10,5	17	3	2700

Base material: PA black reinforced polyamide.
Available in blue color RAL 5005 for Ø80.
Stainless steel stud AISI-304.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Optional: PVC non-slip rubber pad.
Supplied not mounted.
Ø 80 mm Code: 42005001080.
Ø 102 mm Code: 42005001100.
Ø 124 mm Code: 42005001120.
Data Sheet (PDF)

420001 HTADJUSTABLE FEET 122 WITH THREADED STUD

Code	D	h	h1	d	A	H	D1	d2	Wrench	h2	Kg*
42000112502	122	41	20	M16	90	148	90	11	13	5	2500
42000112504	122	41	20	M16	125	183	90	11	13	5	2500
42000112506	122	41	20	M16	165	223	90	11	13	5	2500
42000112507	122	41	20	M20	86	147	90	11	17	5	2700
42000112509	122	41	20	M20	141	202	90	11	17	5	2700
42000112511	122	41	20	M24	96	157	90	11	19	5	2900
42000112513	122	41	20	M24	152	213	90	11	19	5	2900
42000112514	122	41	20	M24	182	243	90	11	19	5	2900

Base material: PA black reinforced polyamide.
Treated steel stud.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Optional: Non-slip rubber pad.
Supplied not mounted.
Code 42005002120.
Data Sheet (PDF)

420001 HT INOXADJUSTABLE FEET 122 WITH THREADED STAINLESS STEEL STUD

Code	D	h	h1	d	A	H	D1	d2	Wrench	h2	Kg*
42000112571	122	41	20	M16	90	148	90	11	13	5	2500
42000112572	122	41	20	M16	125	183	90	11	13	5	2500
42000112575	122	41	20	M16	165	223	90	11	13	5	2500
42000112576	122	41	20	M20	86	147	90	11	17	5	2700
42000112578	122	41	20	M20	141	202	90	11	17	5	2700
42000112580	122	41	20	M24	96	157	90	11	19	5	2900
42000112582	122	41	20	M24	152	213	90	11	19	5	2900
42000112583	122	41	20	M24	182	243	90	11	19	5	2900

Base material: PA black reinforced polyamide.
Stainless steel stud AISI-304.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Optional: Non-slip rubber pad.
Supplied not mounted.
Code 42005002120.
Data Sheet (PDF)

420002ADJUSTABLE FEET 102 FOR HEAVY LOADS WITH THREADED STUD

Code	D	h1	d	A	H	Wrench	h2	Kg*
42000210530	102	20,3	M16	119	159	13	3	3300
42000210531	102	20,3	M16	201	241	13	3	3300
42000210532	102	20,3	M20	107	150	17	3	3500
42000210533	102	20,3	M20	157	200	17	3	3500
42000210534	102	20,3	M24	162	208	19	3	3700

Base material: PA black reinforced polyamide.
Treated steel stud.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Available in blue color RAL 5005.
Other studs lenghts, please ask.
Optional: Black PVC non-slip rubber pad.
Supplied not mounted.
Ø 102 mm Code: 42005001100.
Data Sheet (PDF)

420002 INOXADJUSTABLE FEET 102 FOR HEAVY LOADS WITH THREADED STAINLESS STEEL STUD

Code	D	h1	d	A	H	Wrench	h2	Kg*
42000210550	102	20,3	M16	119	159	13	3	3300
42000210551	102	20,3	M16	201	241	13	3	3300
42000210552	102	20,3	M20	107	150	17	3	3500
42000210553	102	20,3	M20	157	200	17	3	3500
42000210554	102	20,3	M24	162	208	19	3	3700

Base material: PA black reinforced polyamide.
Stainless steel stud AISI-304.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Available in blue color RAL 5005.
Optional: Black PVC non-slip rubber pad.
Supplied not mounted.
Ø 102 mm Code: 42005001100.
Data Sheet (PDF)

420002ADJUSTABLE FEET 122 FOR HEAVY LOADS WITH THREADED STUD

Code	D	h	h1	d	A	H	Wrench	h2	Kg*
42000212530	122	41	20	M16	119	180	13	5	4300
42000212531	122	41	20	M16	201	262	13	5	4300
42000212532	122	41	20	M20	107	171	17	5	4500
42000212533	122	41	20	M20	157	221	17	5	4500
42000212539	122	41	20	M24	90	157	19	5	4700
42000212534	122	41	20	M24	162	229	19	5	4700
42000212541	122	41	20	M30	125	188	24	5	5000
42000212542	122	41	20	M30	185	252	24	5	5000

Base material: PA black reinforced polyamide.
Treated steel stud.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Available in blue color RAL 5005.
Optional: Black PVC non-slip rubber pad.
Supplied not mounted.
Code: 42005002120.
Data Sheet (PDF)

420002 INOXADJUSTABLE FEET 122 FOR HEAVY LOADS WITH THREADED STAINLESS STEEL STUD

Code	D	h	h1	d	A	H	Wrench	h2	Kg*
42000212550	122	41	20	M16	119	180	13	5	4300
42000212551	122	41	20	M16	201	262	13	5	4300
42000212552	122	41	20	M20	107	171	17	5	4500
42000212553	122	41	20	M20	157	221	17	5	4500
42000212559	122	41	20	M24	90	157	19	5	4700
42000212554	122	41	20	M24	162	229	19	5	4700
42000212561	122	41	20	M30	125	188	24	5	5000
42000212562	122	41	20	M30	185	252	24	5	5000

Base material: PA black reinforced polyamide.
Stainless steel stud AISI-304.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Available in blue color RAL 5005.
Optional: Black PVC non-slip rubber pad.
Supplied not mounted.
Code: 42005002120..
Data Sheet (PDF)

420003ADJUSTABLE FEET WITH ASYMETRICAL BASE AND THREADED STUD

Code	D	d	A	H	Wrench	h	h2	Kg*
42000309530	95	M8	45	72	6	15	3	1200
42000309531	95	M8	65	92	6	15	3	1200
42000309532	95	M10	70	99	8	15	3	1300
42000309533	95	M12	43	74	10	15	3	1400
42000309534	95	M12	93	124	10	15	3	1400
42000309535	95	M16	90	125	13	15	3	1700
42000309536	95	M16	125	160	13	15	3	1700
42000309537	95	M16	165	200	13	15	3	1700

Base material: PA black reinforced polyamide.
Treated steel stud.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Optional: Black PVC non-slip rubber pad.
Supplied not mounted.
Code: 42005003090.
Data Sheet (PDF)

420003 INOXADJUSTABLE FEET WITH ASYMETRICAL BASE AND THREADED STAINLESS STEEL STUD

Code	D	d	A	H	Wrench	h	h2	Kg*
42000309550	95	M8	45	72	6	15	3	1200
42000309551	95	M8	65	92	6	15	3	1200
42000309552	95	M10	70	99	8	15	3	1300
42000309553	95	M12	43	74	10	15	3	1400
42000309554	95	M12	93	124	10	15	3	1400
42000309555	95	M16	90	125	13	15	3	1700
42000309556	95	M16	125	160	13	15	3	1700
42000309557	95	M16	165	200	13	15	3	1700

Base material: PA black reinforced polyamide.
Stainless steel stud AISI-304.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Optional: Black PVC non-slip rubber pad.
Supplied not mounted.
Code: 42005003090.
Data Sheet (PDF)

420004ADJUSTABLE FEET 60 WITH POLYAMIDE BASE AND STUD

Code D h d A H Wrench h2 Kg* CAD

42000406501 60 17 M16 67 101 24 3 700

42000406502 60 17 M20 140 174 24 3 750

Base material: PA black reinforced polyamide.
Black reinforced polyamide stud.
Locknut available.
*Max. static load (vertical stud).
Optional: Black PVC non-slip rubber pad.
Supplied not mounted.
Code: 42005001060.
Data Sheet (PDF)

Code	D	h	d	A	H	Wrench	h2	Kg*	CAD
42000406501	60	17	M16	67	101	24	3	700
42000406502	60	17	M20	140	174	24	3	750

420004ADJUSTABLE FEET 80/102 WITH POLYAMIDE BASE AND STUD

Code D D1 h d A H d2 Wrench h2 Kg* CAD

42000408501 80 54 17 M16 67 104 9 24 3 700

42000408502 80 54 17 M20 140 177 9 24 3 750

42000410501 102 74 20 M16 67 107 10,5 24 3 700

42000410502 102 74 20 M20 140 180 10,5 24 3 750

Base material: PA black reinforced polyamide.
Black reinforced polyamide stud.
Locknut available.
*Max. static load (vertical stud).
Holes can be opened with the help of a hammer for fixing the foot to the floor.
Other studs lenghts, please ask.
Optional: Black PVC non-slip rubber pad.
Supplied not mounted.
Ø80 Code: 42005001080.
Ø102 Code: 42005001100.
Data Sheet (PDF)

Code	D	D1	h	d	A	H	d2	Wrench	h2	Kg*
42000408501	80	54	17	M16	67	104	9	24	3	700
42000408502	80	54	17	M20	140	177	9	24	3	750
42000410501	102	74	20	M16	67	107	10,5	24	3	700
42000410502	102	74	20	M20	140	180	10,5	24	3	750

700050ADJUSTABLE FEET

Code D H h d A Kg* CAD

70005011320 32,5 45 20 M8 25 75

70005011400 40 45 20 M8 25 100

70005014400 40 57,5 20 M10 37,5 100

70005015400 40 70 20 M10 50 100

70005019470 47,5 70 20 M12 50 250

Base material: Thermoplastic.
Treated steel stud.
Adjustment angle: 20°.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

Code	D	H	h	d	A	Kg*
70005011320	32,5	45	20	M8	25	75
70005011400	40	45	20	M8	25	100
70005014400	40	57,5	20	M10	37,5	100
70005015400	40	70	20	M10	50	100
70005019470	47,5	70	20	M12	50	250

700052ADJUSTABLE FEET

Code D H h d A Kg* CAD

70005202100 25 41 16 M8 25 100

70005204100 25 53,5 16 M8 37,5 100

70005234100 38 41 16 M8 25 100

70005239100 38 53,5 16 M8 37,5 100

Base material: Thermoplastic.
Treated steel stud.
Mounting with cross screwdriver on the base.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

Code	D	H	h	d	A	Kg*
70005202100	25	41	16	M8	25	100
70005204100	25	53,5	16	M8	37,5	100
70005234100	38	41	16	M8	25	100
70005239100	38	53,5	16	M8	37,5	100

700052ADJUSTABLE FEET

Code D H h d A Kg* CAD

70005210100 30 49 9 M10 40 500

Base material: Thermoplastic.
Treated steel stud.
Mounting with cross screwdriver on the base.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

Code	D	H	h	d	A	Kg*	CAD
70005210100	30	49	9	M10	40	500

700053ADJUSTABLE FEET

Code D H h d A Kg* CAD

70005313100 25 50 15 M10 35 500

70005320100 37,5 50 15 M10 35 750

70005327100 47,5 60 15 M10 45 1000

Base material: Thermoplastic.
Treated steel stud.
Mounting with screwdriver on the base or with a wrench on the stud.
These feet allow the stud to oscillate a few degrees.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

Code	D	H	h	d	A	Kg*
70005313100	25	50	15	M10	35	500
70005320100	37,5	50	15	M10	35	750
70005327100	47,5	60	15	M10	45	1000

700053ADJUSTABLE FEET

Code D H h d A Kg* CAD

70005305100 47,5 54 19 M10 35 750

Base material: Termoplástico.
Treated steel stud.
Mounting with screwdriver on the base or with a wrench on the stud.
These feet allow the stud to oscillate a few degrees.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

Code	D	H	h	d	A	Kg*	CAD
70005305100	47,5	54	19	M10	35	750

420005ADJUSTABLE STEEL FEET

Code	D	H	d	A	S	Wrench	Kg*
42000511530	113	100	M16	58	3,5	13	1500
42000511531	113	187	M16	145	3,5	13	1500
42000511532	113	152	M20	107	3,5	17	1500
42000511533	113	202	M20	157	3,5	17	1500
42000511534	113	138	M24	90	3,5	19	1500
42000511535	113	210	M24	162	3,5	19	1500
42000511536	113	173	M30	125	3,5	24	1500

Material Treated steel.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

420005 INOXADJUSTABLE STAINLESS STEEL FEET

Code	D	H	d	A	S	Wrench	Kg*
42000511550	113	100	M16	58	3	13	1000
42000511551	113	187	M16	145	3	13	1000
42000511552	113	152	M20	107	3	17	1000
42000511553	113	202	M20	157	3	17	1000
42000511554	113	138	M24	90	3	19	1000
42000511555	113	210	M24	162	3	19	1000
42000511556	113	173	M30	125	3	24	1000

Material Stainless steel AISI-304.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

420006ADJUSTABLE STEEL FEET WITH HOLES

Code	D	H	d	A	D1	S	Wrench	Kg*
42000611530	113	100	M16	58	95	3,5	13	1500
42000611531	113	187	M16	145	95	3,5	13	1500
42000611532	113	152	M20	107	95	3,5	17	1500
42000611533	113	202	M20	157	95	3,5	17	1500
42000611534	113	138	M24	90	95	3,5	19	1500
42000611535	113	210	M24	162	95	3,5	19	1500
42000611536	113	173	M30	125	95	3,5	24	1500

Material Treated steel.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

420006 INOXADJUSTABLE STAINLESS STEEL FEET WITH HOLES

Code	D	H	d	A	D1	S	Wrench	Kg*
42000611550	113	100	M16	58	95	3	13	1000
42000611551	113	187	M16	145	95	3	13	1000
42000611552	113	152	M20	107	95	3	17	1000
42000611553	113	202	M20	157	95	3	17	1000
42000611554	113	138	M24	90	95	3	19	1000
42000611555	113	210	M24	162	95	3	19	1000
42000611556	113	173	M30	125	95	3	24	1000

Material Stainless steel AISI-304.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

820001ADJUSTABLE FEET 070 NICKEL PLATED STEEL

Code	D	d	A	H	Kg*
82000105501	55	M12	75	105	1000
82000105502	55	M12	150	180	1000
82000107501	70	M16	75	114	1500
82000107502	70	M16	150	189	1500
82000110501	100	M20	125	177	3000
82000110502	100	M20	200	250	3000
82000110503	100	M24	125	181	4000
82000110504	100	M24	200	256	4000

Material Electroless Nickel plated mild steel.
Optional: Hygienic Seal to provide a protective cover over the ball and socket arrangement.
Supplied as an accessory, not mounted.
Optional: Non Slip Pad, Nitrile Rubber (3mm Thick).
Supplied not mounted:
Ø 55 code 82007045004
Ø 70 code 82007045003
Ø 100 code 82007045001
Ask for other threads and lengths..
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

820002ADJUSTABLE FEET 210 NICKEL PLATED STEEL

Code	D	d	A	H	C	d2	t	Kg*
82000205501	50	M8	60	82	40	5,5	4	300
82000205502	50	M10	75	97	40	5,5	4	500
82000206501	60	M12	150	175	50	5,5	5	1250
82000208501	80	M16	75	106	68	6,5	6	1750
82000210501	100	M16	125	158	82	9	6,5	2500
82000210502	100	M20	150	189	82	9	6,5	2500
82000212501	120	M20	150	191	100	11	7,5	3750
82000212502	120	M24	150	206	100	11	7,5	3750

Material Electroless Nickel plated mild steel.
Optional: Hygienic Seal to provide a protective cover over the ball and socket arrangement.
Supplied as an accessory, not mounted.
Available for Ø100 self-adhesive non-slip rubber, order separatly with code 82007045002.
Ask for other threads and lengths..
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

820003ADJUSTABLE STAINLESS STEEL FEET 200

Code	D	d	A	H	C	d2	t	Kg*
82000305501	50	M8	60	82	40	5.5	4	300
82000305502	50	M10	75	97	40	5.5	5	500
82000305503	50	M12	75	100	40	5.5	4	750
82000306501	60	M12	150	175	50	5.5	5	1250
82000308501	80	M16	75	106	68	6.5	6	1750
82000310501	100	M16	125	158	82	9	6.5	2500
82000310502	100	M20	150	189	82	9	6.5	2500
82000312501	120	M20	150	191	100	11	7.5	3750
82000312502	120	M24	150	206	100	11	7.5	3750

Material stainless steel AISI-303.
Optional: Hygienic Seal to provide a protective cover over the ball and socket arrangement.
Supplied as an accessory, not mounted.
Available for Ø100 self-adhesive non-slip rubber, order separatly with code 82007045002.
Ask for other threads and lengths..
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

820005ADJUSTABLE STAINLESS STEEL FEET 085

Code D d A H Kg* CAD

82000503501 38 M8 60 85 450

82000503502 38 M10 75 100 450

82000505501 55 M12 150 180 1500

82000507501 70 M16 150 189 2000

82000510501 100 M20 150 202 3000

82000510502 100 M24 200 256 4000

Material stainless steel AISI-316 L.
Optional: Hygienic Seal to provide a protective cover over the ball and socket arrangement.
Supplied as an accessory, not mounted.
Optional: Non Slip Pad, Nitrile Rubber (3mm Thick).
Supplied not mounted
Ø 38 code 82007045005
Ø 55 code 82007045004
Ø 70 code 82007045003
Ø 100 code 82007045001
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

Code	D	d	A	H	Kg*
82000503501	38	M8	60	85	450
82000503502	38	M10	75	100	450
82000505501	55	M12	150	180	1500
82000507501	70	M16	150	189	2000
82000510501	100	M20	150	202	3000
82000510502	100	M24	200	256	4000

820006ADJUSTABLE STAINLESS STEEL FEET 087

Code	D	d	A	H	Kg*
82000605501	55	M12	75	102	750
82000605502	55	M12	125	152	750
82000606501	65	M16	75	108	1250
82000606502	65	M16	125	158	1250
82000607501	75	M20	125	166	1750
82000607502	75	M20	150	191	1750
82000610501	100	M24	125	177	2500
82000610502	100	M24	150	202	2500

Material stainless steel AISI-303.
Included: Non Slip Pad, Nitrile Rubber (3mm Thick) bonded to base.
Optional: Hygienic Seal to provide a protective cover over the ball and socket arrangement.
Supplied as an accessory, not mounted.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

820007ADJUSTABLE STAINLESS STEEL FEET 089

Code	D	d	A	H	H3	H1	Kg*
82000705501	55	M12	68	104	25	70	750
82000705502	55	M12	92	154	50	95	750
82000707501	75	M16	68	130	50	75	1750
82000707502	75	M16	92	180	50	100	1750
82000710501	100	M20	68	136	25	85	2500
82000710502	100	M20	92	186	50	110	2500

Material stainless steel AISI-303.
Included: Hygienic Seal to provide a protective cover over the ball and socket arrangement.
Included: Non Slip Pad, Nitrile Rubber (3mm Thick) bonded to base.
*Max. static load (vertical stud).
Data Sheet (PDF)

820008FIXED STAINLESS STEEL FEET 300/315

Code	D	d	A	H	h1	Kg*
55000804501	40	M8	40	52	3	450
82000804502	40	M10	60	72	3	600
82000805501	50	M8	60	74	3	450
55000805502	50	M10	80	94	3	600
82000805503	50	M12	50	65	3	750
82000805504	50	M12	100	115	3	750
55000808501	80	M16	150	171	3	2000
55000808501	100	M16	149	174	3	2000
55000812501	120	M20	200	224	3	3000
82000815501	150	M24	200	226	3	4000

Material stainless steel AISI-303.
Included: Non Slip Pad, Nitrile Rubber (3mm Thick) bonded to base.
Ask for other base diameters, threads and lengths.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

820020-1ADJUSTABLE STAINLESS STEEL FEET 105

Code	D	d	A	H	Kg*
82002051105	50	M10	50	75	350
82002051310	50	M12	100	125	350
82002051710	50	M16	100	128	350
82002071710	75	M16	100	133	750
82002072110	75	M20	150	185	750
82002101710	100	M16	100	138	1000
82002105022	100	M16	150	188	1000
82002102115	100	M20	150	191	1000
82002102515	100	M24	150	193	1000

Material stainless steel AISI-303.
Included: Non Slip Pad, Nitrile Rubber bonded to base.
Optional: Hygienic Seal to provide a protective cover over the ball and socket arrangement, Code 820071.
Supplied as an accessory, not mounted.
Ask for other threads and lengths.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

820022ADJUSTABLE STAINLESS STEEL FEET 125

Code	D	d	A	H	H1	H3	Kg*
82002205501	50	M12	68	104	70	25	350
82002205502	50	M12	92	154	95	50	350
82002207501	75	M16	68	130	75	50	750
82002207502	75	M16	92	180	100	50	750
82002210501	100	M20	68	136	85	25	1000
82002210502	100	M20	92	186	110	50	1000

Material stainless steel AISI-303.
Included: Non Slip Pad, Nitrile Rubber bonded to base.
Optional: Hygienic Seal to provide a protective cover over the ball and socket arrangement. Code 820071.
Ask for other threads and lengths.
*Max. static load (vertical stud).
Data Sheet (PDF)

820050ADJUSTABLE STAINLESS STEEL FEET 205

Code	D	d	A	H	F	d2	Kg*
82005071710	75	M16	100	133	52	13	750
82005071810	75	M16	150	183	52	13	750
82005072115	75	M20	150	185	52	13	750
82005091710	100	M16	100	138	67	13	1000
82005092115	100	M20	150	191	67	13	1000
82005092515	100	M24	150	193	67	13	1000

Material stainless steel AISI-303.
Included: Non Slip Pad, Nitrile Rubber bonded to base.
Optional: Hygienic Seal to provide a protective cover over the ball and socket arrangement, Code 820071.
Supplied as an accessory, not mounted.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

820060RUBBER FEET B WITH STAINLESS STEEL STUD

Code D h d A H Kg* CAD

82006010602 20 13 M6 20 33 10

82006020802 25 14 M8 20 34 15

82006031003 30 16 M10 25 41 25

82006031005 30 16 M10 50 66 25

82006041204 40 20 M12 40 60 65

82006041207 40 20 M12 70 90 65

82006051204 50 20 M12 40 60 90

Material Black Rubber (NBR 60° Shore)
Stainless steel stud.
Stainless steel bolt embedded in black rubber conforming with FDA.
Suitable for light equipment standing on smooth surfaces.
* Max.static load (vertical stud).
Data Sheet (PDF)

Code	D	h	d	A	H	Kg*
82006010602	20	13	M6	20	33	10
82006020802	25	14	M8	20	34	15
82006031003	30	16	M10	25	41	25
82006031005	30	16	M10	50	66	25
82006041204	40	20	M12	40	60	65
82006041207	40	20	M12	70	90	65
82006051204	50	20	M12	40	60	90

430050 - 075ADJUSTABLE FEET Ø75 SANITIZABLE

Code	D	d	A	H	Wrench	h	Kg*
43005007503	75	M16x2	60	103	13	26	1900
43005007504	75	M16x2	90	133	13	26	1900
43005007505	75	M16x2	105	148	13	26	1900
43005007506	75	M16x2	125	168	13	26	1900
43005007507	75	M16x2	155	198	13	26	1900
43005007508	75	M16x2	165	208	13	26	1900
43005007509	75	M16x2	205	248	13	26	1900
43005007510	75	M20x2,5	86	132	17	26	2100
43005007511	75	M20x2,5	116	162	17	26	2100
43005007512	75	M20x2,5	141	187	17	26	2100
43005007513	75	M20x2,5	198	244	17	26	2100
43005007514	75	M24x3	96	142	19	26	2300
43005007515	75	M24x3	122	168	19	26	2300
43005007516	75	M24x3	152	198	19	26	2300
43005007517	75	M24x3	182	228	19	26	2300
43005007518	75	M24x3	300	346	19	26	2300
43005007519	75	M30x3,5	144	190	24	26	2500

Base material: Internal part made of reinforced polyamide; external covering made of stainless steel AISI 304.
Anti-slip pad made of thermoplastic rubber 68 Shore black.
Co-moulded anti-slip pad allows a perfect adherence with steel base. Consequent absence of internal cavities makes foot extremely cleanable. The threaded insert guarantees the protection of the spindle thread.
Locknut available.
*Max. static load (vertical stud).
Data Sheet (PDF)

430050 - 095ADJUSTABLE FEET Ø95 SANITIZABLE

Code	D	d	A	H	Wrench	h	Kg*
43005009503	95	M16x2	60	103	13	26	2200
43005009504	95	M16x2	90	133	13	26	2200
43005009505	95	M16x2	105	148	13	26	2200
43005009506	95	M16x2	125	168	13	26	2200
43005009507	95	M16x2	155	198	13	26	2200
43005009508	95	M16x2	165	208	13	26	2200
43005009509	95	M16x2	205	248	13	26	2200
43005009510	95	M20x2,5	86	132	17	26	2400
43005009511	95	M20x2,5	116	162	17	26	2400
43005009512	95	M20x2,5	141	187	17	26	2400
43005009513	95	M20x2,5	198	244	17	26	2400
43005009514	95	M24x3	96	142	19	26	2600
43005009515	95	M24x3	122	168	19	26	2600
43005009516	95	M24x3	152	198	19	26	2600
43005009517	95	M24x3	182	228	19	26	2600
43005009518	95	M24x3	300	346	19	26	2600
43005009519	95	M30x3,5	144	190	24	26	2800

430050 - 120ADJUSTABLE FEET Ø120 SANITIZABLE

Code	D	d	A	H	Wrench	h	Kg*
43005012503	120	M16x2	60	103	13	26	2500
43005012504	120	M16x2	90	133	13	26	2500
43005012505	120	M16x2	105	148	13	26	2500
43005012506	120	M16x2	125	168	13	26	2500
43005012507	120	M16x2	155	198	13	26	2500
43005012508	120	M16x2	165	208	13	26	2500
43005012509	120	M16x2	205	248	13	26	2500
43005012510	120	M20x2,5	86	132	17	26	2700
43005012511	120	M20x2,5	116	162	17	26	2700
43005012512	120	M20x2,5	141	187	17	26	2700
43005012513	120	M20x2,5	198	244	17	26	2700
43005012514	120	M24x3	96	142	19	26	2900
43005012515	120	M24x3	122	168	19	26	2900
43005012516	120	M24x3	152	198	19	26	2900
43005012517	120	M24x3	182	228	19	26	2900
43005012518	120	M24x3	300	346	19	26	2900
43005012519	120	M30x3,5	144	190	24	26	3100

410001FAST ANTI-VIBRATION FOOT

Code D d e h Ce CAD

41000108012 80 M12 70 29 253

41000111014 110 M14 105 34 623

41000114016 140 M16 117 45 900

41000120020 200 M20 113 62 3600

Zinc-plated steel base.
Removable zinc-plated stud with two nuts and two washers.
Anti-oil rubber.
Ce: Max. static load (Kg).
Data Sheet (PDF)

Code	D	d	e	h	Ce
41000108012	80	M12	70	29	253
41000111014	110	M14	105	34	623
41000114016	140	M16	117	45	900
41000120020	200	M20	113	62	3600

410003MACHINE ANTI-VIBRATION MOUNT

Code D d e h Cd Ce CAD

41000308012 80 M12 53 27 400 1200

41000311014 110 M14 93 32 650 1900

41000314016 140 M16 91 39 900 2850

41000320020 200 M20 113 62 1800 6000

Zinc plated steel base.
Removable stud with two washers and two nuts for adjusting.
Rubber compound oil and slide proof.
Rubber hardness:
1st layer: 60°Shore A(±5)
2nd layer: 80°Shore A(±5)
An intermediate lay of rubber gives higher capacity and vibration control.
Cd: Max. dinamic load (Kg).
Ce: Max. static load (Kg).
Data Sheet (PDF)

Code	D	d	e	h	Cd	Ce
41000308012	80	M12	53	27	400	1200
41000311014	110	M14	93	32	650	1900
41000314016	140	M16	91	39	900	2850
41000320020	200	M20	113	62	1800	6000

410004ANTI-VIBRATION FEET

Code D h d e Ce CAD

41000404025 40 34 M10 50 600

41000408031 80 44 M12 100 800

41000412035 120 48 M16 100 1000

41000416036 160 63 M20 150 2000

41000420060 200 63 M20 150 3000

Zinc plated steel base.
Rubber NBR 80º shore.
Zinc plated steel revolving spindle.
Spindle assembled to the base.
Ce: Max. static load (Kg).
Data Sheet (PDF)

410005ANTI-VIBRATION LEVELING FEET

Code D H d x pitch e Wrench Ce CAD

41000508045 80 42 M12x1,25 120 8 700

41000512045 120 42 M16x1,50 120 12 1000

41000516045 160 47 M20x1,50 170 14 1500

41000520055 200 51 M20x2,50 170 14 4000

Rubber NBR 80° shore.
Heigth adjustable base.
Zinc plated steel spindle.
Fine Thread square headed bolt spindle for all products except code 41000520055.
Base and spindle not assembled. Ce: Max. static load (Kg).
Data Sheet (PDF)

410011P ANTI-VIBRATION MOUNT

Code	D	h	d	e	Cp
41001101510	15	10	M4	10	10
41001101015	15	15	M4	14	10
41001101610	16	10	M5	12	12
41001102010	20	10	M6	16	16
41001102015	20	15	M6	16	18
41001102020	20	20	M6	16	18
41001102025	20	25	M6	16	18
41001102030	20	30	M6	16	16
41001102515	25	15	M6	18	29
41001102520	25	20	M6	18	29
41001102525	25	25	M6	18	29
41001102530	25	30	M8	20	29
41001103010	30	10	M8	23	42
41001103015	30	15	M8	23	42
41001103020	30	20	M8	23	42
41001103025	30	25	M8	23	42
41001103030	30	30	M8	23	38
41001103040	30	40	M8	23	38
41001104020	40	20	M8	23	57
41001104030	40	30	M8	23	75
41001104035	40	35	M8	23	75
41001104040	40	40	M10	28	75
41001105020	50	20	M10	28	117
41001105030	50	30	M10	28	117
41001105040	50	40	M10	28	117
41001105045	50	45	M10	28	117
41001105050	50	50	M10	28	117
41001106020	60	20	M12	37	169
41001106030	60	30	M12	37	169
41001106040	60	40	M12	37	169
41001106050	60	50	M12	37	169
41001107525	75	25	M12	37	265
41001107540	75	40	M12	37	265
41001107550	75	50	M12	37	265
41001110040	100	40	M16	45	471
41001110050	100	50	M16	45	471
41001110080	100	80	M16	57	380

NR Rubber compound 60° ± 5° shore A.
Treated steel stud.
Used like feet for light machinery.
Cp: Max. compression load (Kg).
Data Sheet (PDF)

410010PSS STAINLESS STEEL ANTI-VIBRATION MOUNT

Code D h d e Cp CAD

41001091515 15 15 M4 14 15

41001092015 20 15 M6 16 34

41001092520 25 20 M6 18 45

41001093030 30 30 M8 20 61

41001094030 40 30 M8 23 98

NR Rubber compound 60° ± 5° shore A.
Stainless steel stud AISI 304.
Cp: Max. compression load (Kg).
Data Sheet (PDF)

410013SQUARE ANTI-VIBRATION MOUNT

Code D h d e Cp CAD

41001308010 80x80 30 M10 27 450

41001312012 120x120 30 M12 36 900

NBR Rubber compound 70° ± 5° shore A.
Treated steel stud.
Used like feet for light machinery.
Cp: Max. compression load (Kg).
Data Sheet (PDF)

410076THROUGH HOLE BASE

Code D d d1 H h CAD

41007625000 25 6 11 24 17

Black thermoplastic elastomer with high mechanical resistance.
Available in other colors for suitable quantities.
Data Sheet (PDF)

820070NON-SLIP PAD

Code D (Base diameter)

82007045001 100

82007045002 100 "with holes"

82007045003 70

82007045004 55

82007045005 38

Material Black nitrile.
Choose for the appropriate diameter base.
All the parts are without holes except code 82007045002.
Data Sheet (PDF)

820071HYGIENIC SEAL

Code	d	Material	Color
82007146001	M24	Rubber	Black
82007146002	M20	Rubber	Black
82007146003	M16	Rubber	Black
82007146004	M12	Rubber	Black
82007146021	M12	Plastic	Black
82007146022	M16	Plastic	Black
82007146023	M20	Plastic	Black
82007146024	M24	Plastic	Black

Choose the right model for your thread dimension.
The rubber hygienic seal works with models: 820001, 820002, 820003, 820005, 820006.
The plastic hygienic seal works with models: 820020, 820050.
Provide a protective cover over the ball and socket arrangement helping prevent the ingress of contaminates into this inaccessible area.
Data Sheet (PDF)

110088FEET LOCKNUTS

Code	d (Thread)	Material
11008800006	M6	Zinc-plated
11008800008	M8	Zinc-plated
11008800010	M10	Zinc-plated
11008800012	M12	Zinc-plated
11008800016	M16	Zinc-plated
11008800106	M6	Inox
11008800108	M8	Inox
11008800110	M10	Inox
11008800112	M12	Inox
11008800116	M16	Inox

Material treated steel or stainless steel AISI-304.
DIN 934.
Data Sheet (PDF)

UNC THREADED VERSION - (Inch measure)
Code	D	H	h	d	A	Lbs*	CAD
11008832565	1.26	1.85	0.51	5/16-18	1.34	1763
11008840564	1.57	1.93	0.51	3/8-16	1.42	1763

Code	D	h	d	e	Ce
41000404025	40	34	M10	50	600
41000408031	80	44	M12	100	800
41000412035	120	48	M16	100	1000
41000416036	160	63	M20	150	2000
41000420060	200	63	M20	150	3000

Code	D	H	d x pitch	e	Wrench	Ce
41000508045	80	42	M12x1,25	120	8	700
41000512045	120	42	M16x1,50	120	12	1000
41000516045	160	47	M20x1,50	170	14	1500
41000520055	200	51	M20x2,50	170	14	4000

Code	D	h	d	e	Cp
41001091515	15	15	M4	14	15
41001092015	20	15	M6	16	34
41001092520	25	20	M6	18	45
41001093030	30	30	M8	20	61
41001094030	40	30	M8	23	98

Code	D (Base diameter)
82007045001	100
82007045002	100 "with holes"
82007045003	70
82007045004	55
82007045005	38